The EL-PL906U is a 3LCD laser projector specified for outdoor events and large venues. It is rated at 10,000 ANSI lumens on a native WUXGA 1920 x 1200 panel, driven by a laser diode light source rated for 25,000 hours in normal mode and 30,000 hours in eco. The 490 x 510 x 205 mm, 19 kg body is 3D ready and carries built-in speakers, a 1.08-1.76:1 lens, and a 0.71-30 m throw for screens from 30 to 300 inches. Contrast is 5,000,000:1, and the unit runs on a 100-240 V AC supply.
The brightness is stated as an ANSI figure, not a bare peak: 10,000 ANSI lumens. On an outdoor screen after dark, or in a hall with the house lights up, that is the number that decides whether the image reads from the back row. Paired with a 5,000,000:1 contrast ratio, it holds depth on dark stage sets and shadowed scenes rather than washing them grey.
The panel is native WUXGA 1920 x 1200, a 16:10 frame with more vertical height than widescreen, so a spreadsheet, a CAD sheet or a fine-text slide keeps its rows. The projector also accepts up to 4K sources and scales them to the panel. Three 0.64 inch LCD panels carry red, green and blue separately, so colour brightness tracks white brightness and there is no colour wheel to break the image in front of a camera.
The unit is 3D ready, so a venue or an event can run 3D content without a second projector. Combined with the ANSI brightness, that keeps 3D imagery from dimming past usable levels on a large screen.
Speakers are built in, which removes a separate sound source for smaller rooms and quick set-ups: one power lead, one signal, and the presentation is heard as well as seen. For larger or outdoor stages, feed the house PA and use the built-in set for monitoring and cues.
The EL-PL906U is specified for outdoor use and large venues: exhibition, event and stage work where a screen has to be bright enough to compete with ambient light. The laser diode source is rated for 25,000 hours in normal mode and 30,000 hours in eco, so a night-after-night event schedule does not mean a lamp replacement schedule.
Note: the unit is not weather-sealed — keep the body under cover or in a protective enclosure when used outside.
The fixed lens is F1.58-2.02 with a 15.3-24.6 mm focal range and a 1.08-1.76:1 throw ratio, covering 30 to 300 inch screens from a 0.71-30 m throw. Lens shift of V +45% - 0% and H +/-21% places the picture without moving the bracket, and the projector mounts front or rear, on a desktop or suspended. Send the screen size and the distance, and the fit can be confirmed before the order ships.
The rear panel carries three HDMI ports, a VGA input, two RJ45 ports, two D-Sub 9 control ports, USB-A and USB-B, and an IEC AC inlet.
Port protocol names beyond these are not stated in the listing specification; confirm the exact input/output assignment with us when the source equipment is fixed.
The projector runs on 100-240 V AC at 50/60 Hz with a 2.1-5.0 A input. It is a fixed-install and event body at 490 x 510 x 205 mm and 19 kg, made in Guangdong, China, with no built-in operating system and an English menu.
| Brightness | 10,000 ANSI lumens |
|---|---|
| Native Resolution | WUXGA 1920 x 1200 (16:10) |
| Display Engine | 3LCD, 3 x 0.64 inch panels, no colour wheel |
| Light Source | Laser diode — 25,000 h normal / 30,000 h eco |
| Contrast Ratio | 5,000,000:1 |
| Screen Size | 30 – 300 inches |
| Throw Distance | 0.71 – 30 m |
| Lens | F1.58-2.02 / f15.3-24.6 mm, 1.08-1.76:1 throw ratio |
| Lens Shift | V +45% - 0% / H +/-21% |
| 3D | 3D ready |
| Audio | Built-in speakers |
| Projection Modes | Front and rear; desktop or suspended |
| Inputs | 3 x HDMI, 1 x VGA, 2 x RJ45, 2 x D-Sub 9, USB-A, USB-B, IEC AC inlet |
| Power Supply | 100-240 V AC, 50/60 Hz, 2.1-5.0 A |
| Dimensions | 490 x 510 x 205 mm |
| Weight | 19 kg |
| Operating System | None built-in; English menu |
| Origin | Guangdong, China |
Each unit is covered by a 3-year warranty. Send us the model, the screen size and the distance, and we will confirm the lens and the port configuration before you order.
