Large Venue 9800 ANSI Lumens DLP Laser Projector Ultra HD Resolution
Large Venue Projector 9800 ANSI Lumens DLP Laser Ultra HD Resolution Projector SNP-LU9000
Features:
Ultra HD resolution
No rainbow effect
Two-channel digital signal display
Alien 3D display
New laser light source, environmental protection and eye protection
Efficient dustproof technology
Smart switch
Twin turbo cooling system
Standard interface configuration
3D connection
3D high frame rate refresh
HDBaseT
Vertical Horizontal Keystone Correction
way to control
20,000 hours*1 Long-life laser light source
This series of laser light source engineering machines has a brightness of up to 7200lm ~ 8200lm, and a light source life of up to 20,000 hours (standard mode) ↑. The light source components are sealed to prevent dust from entering the optical core components such as fluorescent wheels and lenses that may affect the use effect and service life, effectively reducing maintenance costs and ensuring long-term continuous operation. It is more suitable for the engineering market that needs to be used for a long time! Whether it is an exhibition display or an electronic billboard, it can be more calm.
Stepless energy saving mode
On the basis of the light source life of up to 20,000 hours (standard mode)*1, the traditional fixed energy-saving mode design is abandoned. According to the characteristics of the new E-laser light source, the energy-saving effect and noise are improved, and the stepless energy-saving mode is innovatively developed, which is more applicable In the changeable engineering application scenarios!
Taking into account the requirements of brightness and service life, it provides users with 4 selectable modes, which can be realized by selecting and applying the appropriate mode through the menu.
|
Light output
|
light output efficiency
|
Light source life (h)
|
|
standard mode
|
100%
|
20000
|
|
Energy saving mode 1
|
70%
|
30000
|
|
Energy saving mode 1
|
50%
|
50000
|
|
silent mode
|
50%
|
20000
|
In the above-mentioned standard mode, users can freely adjust according to their own needs (unit accuracy can reach 1%), which can meet the normal needs of the display brightness and achieve the effect of energy saving.
*1 This time is the life time of the light source, not the warranty time.
*2 The time is the life time of the light source after the long life 2 mode is always turned on, not the warranty time.
*3 The service life will vary greatly depending on environmental conditions, usage habits and other factors. And this time is the life time of the light source, not the warranty time.
HDR high quality
Two additional image adjustment modes for HDR high quality are added. And by activating the dynamic use range of expanding the brightness, the presented projection picture is more realistic.
image processing technology
The RESOLUTION ENHANCER (image quality enhancement) technology, which is specially improved for the characteristics of the laser light source, enhances the realism of the image by enhancing the "fineness", "shading" and "vividness" suitable for the color characteristics of the laser light source. At the same time, SUPER CONTRAST The adjustment function has been improved by "high color rendering", which can more deeply correct the influence of indoor lighting or external light sources on the picture, thereby improving the picture contrast effect and optimizing the visual experience. Even in a bright environment, it can be displayed clearly image.
Stitching fusion and surface imaging functions
Using multiple projectors, through the splicing function, seamless splicing of large images can be achieved. At the same time, due to the geometric correction function, it can image on curved objects such as cylinders and spheres. Using the curved surface correction function, the distortion of the image can be supplemented and adjusted, and the curved surface projection also has the creativity of splendid Seiko. On this basis, by using the camera (or camera), the automatic geometric correction of stacking stitching fusion, special shape and brightness color is performed.
※ Equipment other than projectors required for automatic geometric correction needs to be prepared separately
Geometric Correction (Deformation)
Shaped projections on spherical, curved and corners are made possible by geometric correction using a dedicated door application on a PC.
high performance transmission
The whole series is equipped with HD BaseT interface and 2-way HDMI input (HDMI1/ HDMI2), 1-way HDMI output, 3GSDI (only supported by SNP-DU8200) interface, which can support 1080p high-definition transmission under long distance, FulHD, 4K signal compatible output.
※Up to 4 projectors can be cascaded output through HDMI OUT port, and the number of cascades depends on signal equipment, cables, etc
Air pressure sensor monitoring function
In addition to the commonly used sensors for temperature, illumination, gravity, etc., this projector also has a built-in air pressure sensor monitoring system, which controls the projector's fan speed according to the detection results of air pressure at different altitudes to ensure stable operation of the projector, so that the projector can adapt to "The Plateau Effect"
360° omnidirectional projection
The installation method is flexible and can be installed at any angle.
Auto power on*4
When the projector is in standby mode and detects a video signal input from an external device, this function activates the projector to automatically display the image on the screen.
*4 This function only supports COMPUTER IN1, HDMI2, VIDEO port input. This function is not available when Standby Mode is set to Network Standby (WOL) or Power Save. This feature may be inadvertently enabled through a connected external device. So do not put things on or around the projector.
Motorized lenses, lens shift and lens memory
When the projector is in standby mode and detects a video signal input from an external device, this function activates the projector to automatically display the image on the screen.
※When using ML-713CN.
4K signal input
The HDMI, HDBaseT and DisplayPort ports of this series of projectors recognize 4K signal input. It provides more diverse choices for engineering installation and brings a higher-end visual enjoyment.
4K Brown Mode: Hai mode supports 4K 50Hz/60Hz 420 format and 24Hz/25Hz/30Hz444, 4:2:2 format.
4K conversion mode: Hai mode supports 4K 50Hz/60Hz44, 42:2, 4:2:0 formats and 24Hz25Hz/30Hz, 4:4, 4:2:2 formats.
|
Projection Technology
|
DLP
|
|
Display Equipment
|
Chip Specification
|
DMD, 0.67'
|
|
Resolution
|
Pixel
|
1920×1200
|
|
Brightness
|
11000 ANSI Lumen
|
|
Light source
|
RgB Dual Color Laser (red & blue)
|
|
Light Lifespan
|
20,000hrs
|
|
Contrast Ratio
|
120,000:1
|
|
Aspect Ratio
|
16:10
|
|
Mounting
|
Ceiling / Desktop / Front / Rear
|
|
Lens Type
|
Motorized Shift / Motorized Zoom / Motorized Focus
|
|
Lens Shift
|
Horizontal
|
+/- 15%
|
|
Vertical
|
+/- 50%
|
|
Lens
|
Standard Lens A06
|
Throw Ratio 1.22~1.53
|
|
Optional Lens A15
|
Throw Ratio 0.75~0.95
|
|
Optional Lens A01
|
Throw Ratio 0.95~1.22
|
|
Optional Lens A03
|
Throw Ratio 1.52~2.92
|
|
Optional Lens A13
|
Throw Ratio 2.90~5.50
|
|
Fixed Lens A16
|
Throw Ratio 0.36
|
|
Noise
|
Standard @25℃
|
Full Mode: 38db / Eco Mode: 36db
|
|
Power Consumption
|
Standard mode: 1050W, Stand-by mode: <0.5W
|
|
Dimensions (WxDxH)
|
484mm x 519mm x 181mm / 19in x 20.4in x 7.1in
|
|
Weight
|
23.5kg / 51.8lb
|
|
Input
|
PC / Video
|
HDMI 1.4 HDCP Support x1
|
|
DVI-D x1
|
|
D-Sub 15pin x1
|
|
HDBaseT x1
|
|
3G-SDI x1
|
|
3D-Sync x1
|
|
Output
|
PC / Video
|
D-Sub 15pin x1
|
|
HDMI 1.4 HDCP Support x1
|
|
3D-Sync x 1
|
|
Control Port
|
IR
|
IR Remote
|
|
Wired Remote Control
|
Wired in x1
|
|
LAN
|
RJ-45 x1
|
|
WAN
|
USB type A x1
|
|
RS-232
|
RS-232 (D-sub 9 pin) x1
|
|
System Upgrade
|
Mini USB (for LAN Firmware upgrade only) (D-sub 9pin) x1
|
