The FLY-E750U is the flagship of the E Series, sharing its chassis, lens mount and port set with the two models below it. What sets it apart is output: 7,500 ISO lumens, centre rated at 7,500 as well. The picture is native WUXGA 1920x1200 on a single 0.8 inch DLP chip in 16:10, housed in the same 420 x 340 x 137.5 mm case and still under 10 kg. Uniformity is 90% or better by JBMA, and colour covers more than 100% of REC.709 with 3D colour management. Laser life is 20,000 hours standard, 25,000 in eco mode.
The E Series is specified for six venue types:
At 7,500 lumens, this is the top of that range — the model for rooms where the sizes below run out of headroom: a theme park or immersive space with mixed ambient light, a trade show stand under rig lighting, and a ballroom that stays usable with the house lights up. It also does the work of a pair of smaller units: one lens, one mount, one control address and one white balance instead of a blend. At 450 W and under 10 kg, that happens on a single circuit and with a single installer.
Send the screen size and the distance from the projector to the wall, and the lens can be fixed before the order ships. The standard 1.2–1.56:1 covers most rooms at 100 to 300 inch; the other six reach shorter throws down to 0.4:1 and long halls out to 2.16:1. All seven mount on the same body, and the lens sits in the centre of the chassis.
The unit draws 450 W, plus or minus 10 per cent, and under 0.5 W on standby, so a room already running a 5,000 lumen projector does not need a new circuit. Air enters and leaves on both sides, so it can sit close to a wall, in a rear recess, or between two other fixtures without starving itself.
Each unit ships with a remote control, a power cord matched to your region, an HDMI cable, a universal quick start guide, a certificate and a warranty card.
Compatibility is model-specific. Send us the projector model, the screen size and the distance, and we will confirm the lens and the port configuration before you order.
