Overview: WUXGA 1920 * 1200, 6,000 lm, 1.08–1.76:1
The 120 rows most projector listings never mention. A 1080p projector gives you 1920 * 1080. This one gives you 1920 * 1200 — the same width, 120 more rows of pixels. That is 11% more vertical image area, and in the rooms this projector is bought for, those 120 rows are the whole point.
An A1 drawing sheet at full width fits instead of being cropped. A spreadsheet shows eleven rows instead of nine. A lecture slide with a title, a chart and a footnote line does not need the footnote scrolled off. None of that is a brightness problem, and no amount of lumens fixes it — which is why we put it first.
The EL-VPL555UH is a 3LCD laser projector with a native WUXGA panel, a 1.6* zoom lens, a 6,000 lumen typical light path and a 7.8 kg body. It is built for meeting rooms, teaching rooms, drawing offices and exhibition spaces where the content is dense and the room is not always dark.
Brightness: 6,000 Lumens on the Typical Basis
The figure is 6,000 lumens, on the typical basis our factory sheet uses. It is not an ANSI rating and not an ISO 21118 rating — the source document states no test condition, and we will not relabel a typical figure as a standard one.
Treat 6,000 as what a production unit will land near, not as a contractual floor. If a tender requires ANSI lumens with a test report, say so early: we would rather declare that we cannot supply an ANSI rating than have the gap appear at acceptance.
Within our own range the same machine is also offered as the EL-VPL605UH at 6,500 lumens typical. The 500-lumen step exists for larger screens and rooms that cannot be dimmed at all. For a standard 100–150 inch room with blinds, 6,000 is the version that keeps the budget for the lens and mount.
Brightness cannot be dialled down by a slider — the source lists light source brightness adjustment as not available. Output is set by the power modes instead: Normal, ECO1 and ECO2.
3LCD Light Path: What It Buys You
Three 0.64-inch LCD panels with MLA produce the image optically, with no colour wheel in the path. Two consequences that matter in daily use: there is no rainbow artefact on fast motion or high-contrast edges, and there is no wheel to replace as a consumable.
Colour gamut is 105% Rec.709 — full coverage of the SDR broadcast gamut that presentation, education and video-conference content is authored in. Contrast is 5,000,000:1 on a FOFO (full-on/full-off) basis, a static measurement of panel and light path rather than a dynamic iris figure.
Brightness uniformity is 0.8 actual minimum on the JIS X 6911 method. That is normal for this panel class, and it is worth a check if the room plans to put critical detail in a corner rather than the centre.
Six picture modes ship: Dynamic, Standard, Cinema, Colorboard, sim-DICOM and Blackboard (Green). sim-DICOM is a greyscale gamma preset for CT and MRI stills in a teaching room. It is not DICOM conformance and not a calibrated medical display; do not quote it as a diagnostic-grade solution.
Native WUXGA, with 4K as an Input — Not as a Claim
Native resolution is 1920 * 1200 on a 16:10 panel. 4:3 and 16:9 sources are supported as compatible formats: on a 16:9 screen the image is displayed within the panel geometry, on a 16:10 screen you use the full panel.
The HDMI inputs accept 4K signals up to 4K@60Hz and scale them to the panel. This is not a native 4K projector — a 0.64-inch 3LCD panel cannot resolve 3840 * 2160 — and it must not be sold as one. For native 4K the right model in this range is the EL-VPL495KH.
HDR10 is not supported. Do not position this unit for HDR content delivery.
The Lens: 1.6* Manual Zoom, Stated Up Front
The lens is a ZMAX with a 1.6* zoom ratio, F1.58–2.02, focal length 15.3–24.6 mm. Throw ratio runs 1.08:1 at the wide end to 1.76:1 at the tele end. Screen size range is 30 to 300 inches.
Zoom and focus are manual. This is the specification that most often surprises a buyer who has been comparing against motorised-lens models, so it belongs here rather than in a data table. Two practical consequences: the installer sets focus once at commissioning, and the projector body has to stay reachable afterwards. A flush ceiling mount that leaves no hand clearance turns that first adjustment into the only one.
Offset is 50%–95%, which locates the image vertically relative to the lens axis as a percentage of image height — it tells you where the body can sit for a given screen, and it is not a second adjustment range.
Lens shift is +45% to 0% vertical and ±21% horizontal. Read the vertical figure as written: it runs from the +45% position down to neutral, and the sheet does not define travel below neutral. Do not plan a mount that depends on shifting the image downward past centre.
Mounting distance is throw ratio * image width, and for 16:10 width = diagonal * 0.848:
| Screen |
Image Width |
Throw Distance |
| 100" |
2.15 m |
2.33 – 3.79 m |
| 150" |
3.23 m |
3.49 – 5.69 m |
| 200" |
4.31 m |
4.65 – 7.58 m |
| 300" |
6.46 m |
6.98 – 11.37 m |
Give us the screen size and the ceiling height and we will return the mounting position and the shift ceiling for your room, rather than leave you interpolating from a table built for someone else's aspect ratio.
Geometry Correction for Real Rooms
Keystone correction is ±30° vertical and ±30° horizontal. Beyond keystone the unit offers pincushion/barrel correction, 6-corner geometry correction, 4-corner correction and grid image tune.
Which one you need depends on the mount. A projector hung square to the wall needs keystone at most; a projector on a side wall, or in a room where the mount point is wherever the structure allowed it, needs corner correction — keystone alone cannot fix an image that is trapezoidal on two axes at once.
Auto setup covers input search, auto PC and auto keystone. Use it for temporary or mobile setups; in a fixed installation set geometry manually and switch auto keystone off, or something crossing the beam can re-trigger it.
360° projection is supported, and auto ceiling handles inverted mounting. Digital zoom runs 1–33*, but it crops and rescales, so treat it as fine adjustment and do the work optically.
Edge blending is not available. For a blended multi-projector canvas this is the wrong unit.
Signal, Ports and Control
Two HDMI 1.4B inputs, one VGA input, one VGA output, one USB-A, one USB-B for display and a second USB-B for firmware upgrade, one RJ45 for display, one RJ45 for control, one RS232, 3.5 mm audio in and out, and a 16 W speaker. HDBaseT is optional, not standard — confirm it at order time if the specification calls for it.
HDMI 1.4B is the honest limit: 4K@60 is accepted, but 18 Gbps sources, 4K@60 4:4:4 and HDR metadata are out of scope.
Wireless projection is not available — there is no built-in Wi-Fi. If the room needs BYOD, add an external HDMI wireless kit and do not quote built-in casting.
Control integration covers Crestron RoomView, AMX Discovery and PJ-Link. The control RJ45 is separate from the display RJ45, so management traffic does not share the video network port.
The on-screen menu ships in 26 languages: English, German, French, Italian, Spanish, Polish, Swedish, Dutch, Portuguese, Japanese, Simplified and Traditional Chinese, Korean, Russian, Arabic, Turkish, Finnish, Norwegian, Danish, Indonesian, Hungarian, Czech, Kazakh, Vietnamese, Thai and Farsi.
Signal handling covers H-sync 15–100 kHz and V-sync 24–85 Hz; computer input from VGA through WUXGA plus 4K@60Hz; video input 480i/p, 576i/p, 720p, 1080i and 1080p.
Light Source, Power and the Room
The laser light source is rated 20,000 hours in Normal and 30,000 hours in ECO1 and ECO2. Quote the mode with the number: a bare "30,000 hours" implies normal operation, and it is not. These are nominal ratings, not a warranty term. The filter has an 8,000-hour service interval.
Power consumption is 310 W in Normal and 190 W in both ECO1 and ECO2, with standby below 0.5 W. The two eco modes draw the same on this model — unlike the 6,500 lm version at 325/220/190 — so if you are sizing a circuit or a UPS around eco operation, take 190 W here.
Noise is 38 dB in Normal, 30 dB in ECO1 and 28 dB in ECO2. The 28 dB figure belongs to ECO2 only: the sheet gives no brightness value at ECO2, so the quiet number and the 6,000 lumen number never occur at the same time, and a proposal that puts them side by side is describing two different states.
Operating environment is 0–40 °C and 20–85% humidity, storage down to −10 °C, altitude 0–3,000 m with a dedicated high-altitude mode. Cooling time is configurable at 0 s, normal or 30 s, and the unit suspends after five minutes without signal by default — on a scheduled room, set that timeout deliberately or the projector will drop to standby mid-agenda.
Physical, Compliance and What Is in the Box
Dimensions are 405 * 358 * 137 mm without the lens and 405 * 363 * 137 mm with it. Net weight is approximately 7.8 kg, gross approximately 10.3 kg, carton 510 * 498 * 260 mm. One installer can lift the body; ceiling work still deserves a second pair of hands.
Certification held: CCC, CB, NRTL, FCC, FDA, CE-EMC, CE-LVD, CE-ERP and China energy grade 1. Not held: CECP, CEL, PES, VCCI.
EMC is Class A at 3 dBm. Class A equipment is intended for commercial and industrial environments and is not certified for residential use. If the end user is residential, that is a compliance question to raise before the order.
Standard accessories are the power cord, remote control and RC battery; the manual ships in Chinese and English. No ceiling bracket and no signal cables are included. Warranty terms, MOQ and lead time are not part of the product file — send the quantity, destination country and any tender requirement and our sales team will quote them.
What We Do Not Claim
We do not describe this projector as ANSI-rated, ISO 21118-rated, native 4K, HDR10-capable, wirelessly enabled, edge-blendable, DICOM-certified or fitted with a motorised lens. We do not publish a fixed distance table in metres, because throw ratio converts differently for every screen's active area. We do not quote 30,000 hours as normal-mode life, and we do not pair 28 dB with 6,000 lumens.
Specification Summary
| Model | EL-VPL555UH |
| Display technology | 3LCD, liquid crystal |
| Display panel | 3 * 0.64" with MLA |
| Brightness | 6,000 lm (TYP) |
| Native resolution | WUXGA 1920 * 1200 |
| Aspect ratio | Native 16:10; compatible 4:3 / 16:9 |
| Contrast (FOFO) | 5,000,000 : 1 |
| Colour gamut | 105% Rec.709 |
| Uniformity (actual min) | 0.8 (JIS X 6911) |
| Light source | Laser |
| Light life | 20,000 h Normal / 30,000 h ECO1 / 30,000 h ECO2 |
| Filter life | 8,000 h |
| Lens | ZMAX, F1.58–2.02, f 15.3–24.6 mm, manual zoom & focus |
| Throw ratio | 1.08 – 1.76 : 1 |
| Zoom ratio | 1.6* |
| Screen size | 30 – 300 inch |
| Offset | 50% – 95% |
| Lens shift | V +45% – 0%, H ±21% |
| Keystone | V ±30°, H ±30°; pincushion/barrel, 6-corner, 4-corner, grid tune |
| 360° projection | Yes |
| Edge blending | Not available |
| HDMI | 1.4B *2 in |
| VGA | *1 in, *1 out |
| USB | USB-A *1; USB-B *1 (display), USB-B *1 (upgrade) |
| Network | RJ45 *1 (display), RJ45 *1 (control); HDBaseT *1 optional |
| Control | RS232 *1; Crestron RoomView, AMX Discovery, PJ-Link |
| Audio | 3.5 mm in *1, 3.5 mm out *1, 16 W speaker *1 |
| Power consumption | 310 W Normal / 190 W ECO1 / 190 W ECO2; < 0.5 W standby |
| Noise | 38 dB Normal / 30 dB ECO1 / 28 dB ECO2 |
| Operating environment | 0–40 °C, 20–85% RH, 0–3,000 m |
| Dimensions | 405 * 358 * 137 mm (no lens); 405 * 363 * 137 mm (with lens) |
| Net / gross weight | ~7.8 kg / ~10.3 kg |
| Package | 510 * 498 * 260 mm |
| Certification | CCC, CB, NRTL, FCC, FDA, CE-EMC, CE-LVD, CE-ERP, energy grade 1 |
| EMC class | Class A @ 3 dBm |