Overview: Built for Rooms That Cannot Be Darkened
EL-VPL605UH 3LCD Laser Projector — 6,500 lm, WUXGA, 1.08–1.76:1
Most installation projectors are specified for a controlled room. This one is specified for the rooms that are not: a lecture theatre with the lights on for note-taking, a meeting room with windows on two walls, a showroom that has to stay bright for the exhibits. The EL-VPL605UH pairs a 6,500 lumen laser light path with a native WUXGA panel and a 1.6* zoom lens, in a 7.8 kg body that one installer can lift.
It is a 3LCD machine. Three 0.64-inch LCD panels with MLA produce the image optically, without a colour wheel, so there is no rainbow artefact on fast motion and no wheel to replace.
Brightness: 6,500 Lumens — and the Basis Behind It
The figure is 6,500 lumens, measured on the typical basis our factory sheet uses. It is not an ANSI rating and not an ISO 21118 rating — the source document does not state a test condition, and we will not relabel a typical figure as a standard one.
What that means in practice: treat 6,500 as the number a production unit will land near, not as a contractual minimum. If your tender document specifies ANSI lumens and requires a test report, tell us — we would rather say we cannot supply an ANSI rating than have you discover the difference at acceptance.
For comparison inside our own range, the EL-VPL555UH is the same machine at 6,000 lm typical. The 500-lumen step is the only optical difference between the two, and it exists for one reason: a larger screen, or a room that cannot be dimmed at all.
Resolution: 1920 * 1200 — and Why the Extra 120 Rows Matter
Native resolution is WUXGA, 1920 * 1200, on a 16:10 panel. Against a 1080p projector that is 11% more vertical pixels — which is the difference between a full A1 drawing sheet fitting on screen and being cropped, and the difference between seeing eleven rows of a spreadsheet and nine.
4:3 and 16:9 sources are supported as compatible formats. On a 16:9 screen the image is displayed within the panel with the expected geometry; on a 16:10 screen you use the whole panel.
The projector accepts 4K signals up to 4K@60Hz on its HDMI inputs and scales them to the panel. It is not a native 4K projector — a 0.64-inch 3LCD panel cannot resolve 3840 * 2160 — and it should not be sold as one. If native 4K matters for the application, the right model in this range is the EL-VPL495KH.
Colour, Contrast and Uniformity
Colour gamut is 105% Rec.709, which covers the SDR broadcast gamut that presentation, education and video-conference content is authored in. Contrast is 5,000,000:1 on a FOFO (full-on/full-off) basis — a static measurement of the panel and light path, not a dynamic iris figure.
Brightness uniformity is 0.8 actual minimum on the JIS X 6911 method. That is normal for this panel class, and it is worth knowing if the installation puts critical detail in a corner rather than the centre: ask for a uniformity capture on your content before you commit a room design.
There are six picture modes: Dynamic, Standard, Cinema, Colorboard, sim-DICOM and Blackboard (Green). sim-DICOM is a greyscale gamma preset that makes CT and MRI stills look reasonable in a teaching room. It is not DICOM conformance, it is not a calibrated medical display, and it must not be offered as a diagnostic-grade solution.
The Lens: 1.6* Manual Zoom and Focus
The lens is a ZMAX with a 1.6* zoom ratio, F1.58–2.02, focal length 15.3–24.6 mm. Throw ratio runs from 1.08:1 at the wide end to 1.76:1 at the tele end.
Zoom and focus are manual. This is the one specification that most often surprises a buyer who has been comparing against motorised-lens models, so it belongs in the first paragraph rather than the data sheet. Two practical consequences: the installer sets focus once at commissioning, and the projector body has to remain reachable — a flush ceiling mount that leaves no hand clearance will make that first adjustment the last one.
Screen size range is 30 to 300 inches. Offset is 50%–95%, which describes where the image sits vertically relative to the lens axis, expressed as a percentage of image height — it tells you where the body can physically sit, and it is not a second adjustment range.
Lens shift is +45% to 0% vertical and ±21% horizontal. Read the vertical figure as written: it runs from the +45% position down to neutral, and the sheet does not define travel below neutral. Plan a mount that does not depend on shifting the image downward past centre.
Mounting distance is throw ratio * image width. For 16:10, width = diagonal * 0.848:
| Screen |
Image Width |
Throw Distance |
| 100" | 2.15 m | 2.33 – 3.79 m |
| 150" | 3.23 m | 3.49 – 5.69 m |
| 200" | 4.31 m | 4.65 – 7.58 m |
| 300" | 6.46 m | 6.98 – 11.37 m |
Send us the screen size and the ceiling height and we will return the mounting position and the shift ceiling for your room, rather than leave you to interpolate from a table that assumes someone else's aspect ratio.
Geometry Correction That Works Off-Axis
Keystone correction is ±30° vertical and ±30° horizontal. Beyond keystone, the unit provides pincushion/barrel correction, 6-corner geometry correction, 4-corner correction and grid image tune.
That combination matters for the installations this projector is actually sold into. A projector hung square to the wall needs keystone at most; a projector on a side wall, or in a heritage building where the mount point is where the structure allowed it, needs corner correction — keystone alone cannot fix an image that is trapezoidal on two axes at once.
Auto setup covers input search, auto PC and auto keystone. Use it for temporary setups; for a fixed installation set the geometry manually and leave auto keystone off, or a passing object in the beam can re-trigger it.
360° projection is supported, as is auto ceiling for inverted mounting. Digital zoom runs 1–33*, but it crops and rescales, so treat it as a fine adjustment and do the work with the optical zoom.
Edge blending is not available on this model. For a blended multi-projector canvas, this is the wrong unit — do not commit it to that design.
Signal, Ports and Control
Two HDMI 1.4B inputs, one VGA input and one VGA output, one USB-A, one USB-B for display and a second USB-B for firmware upgrade, one RJ45 for display, one RJ45 for control, one RS232, 3.5 mm audio in and audio out, and a 16 W speaker. HDBaseT is available as an option — it is not fitted as standard, so confirm it at order time if the specification calls for it.
HDMI 1.4B is the honest limit: 4K@60 is accepted, but 18 Gbps sources, 4K@60 4:4:4 and HDR metadata are not in scope. HDR10 is not supported on this model.
Wireless projection is not available — there is no built-in Wi-Fi module. If the room needs BYOD, add an external HDMI wireless kit; do not quote built-in wireless casting.
Control integration covers Crestron RoomView, AMX Discovery and PJ-Link. The control RJ45 is separate from the display RJ45, so management traffic does not share the video network port.
The on-screen menu ships in 26 languages, including English, German, French, Italian, Spanish, Polish, Swedish, Dutch, Portuguese, Japanese, Simplified and Traditional Chinese, Korean, Russian, Arabic, Turkish, Finnish, Norwegian, Danish, Indonesian, Hungarian, Czech, Kazakh, Vietnamese, Thai and Farsi. Signal handling covers H-sync 15–100 kHz and V-sync 24–85 Hz; computer input from VGA through WUXGA plus 4K@60Hz; video input 480i/p, 576i/p, 720p, 1080i and 1080p.
Light Source, Power and Operating Environment
The laser light source is rated 20,000 hours in Normal, 30,000 hours in ECO1 and 30,000 hours in ECO2. Quote the mode with the number — a bare "30,000 hours" implies normal operation, and it is not. These are nominal ratings, not a warranty term.
The filter has an 8,000-hour service interval.
Power consumption is 325 W in Normal, 220 W in ECO1 and 190 W in ECO2, with standby below 0.5 W. Note that this model steps down in both eco modes; the 6,000 lm version sits at 310/190/190, so the two are not interchangeable when you are sizing a circuit or a UPS.
Noise is 38 dB in Normal, 30 dB in ECO1 and 28 dB in ECO2. The 28 dB figure belongs to ECO2 only: the sheet gives no brightness value at ECO2, so the quiet number and the 6,500 lumen number do not occur together, and a proposal that places them side by side is describing two different operating states.
Operating environment is 0–40 °C and 20–85% humidity, storage down to −10 °C, altitude 0–3,000 m with a dedicated high-altitude mode. Cooling time is configurable at 0 s, normal or 30 s, and the unit suspends after five minutes without signal by default — on a scheduled room, set that timeout deliberately or the projector will drop to standby mid-agenda.
Physical, Compliance and What Is in the Box
Dimensions are 405 * 358 * 137 mm without the lens and 405 * 363 * 137 mm with it. Net weight is approximately 7.8 kg, gross approximately 10.3 kg, carton 510 * 498 * 260 mm. One installer can handle the body; ceiling work still deserves a second pair of hands.
Certification held: CCC, CB, NRTL, FCC, FDA, CE-EMC, CE-LVD, CE-ERP and China energy grade 1. Not held: CECP, CEL, PES, VCCI.
EMC is Class A at 3 dBm. Class A equipment is intended for commercial and industrial environments and is not certified for residential use. If the end user is a residential customer, that is a compliance question, not a marketing nuance — raise it before the order, not after.
Standard accessories are the power cord, remote control and RC battery. The manual ships in Chinese and English. No ceiling bracket and no signal cables are included. Warranty terms, MOQ and lead time are not part of the product file — send the quantity, destination country and any tender requirement, and our sales team will quote them.
What We Do Not Claim
We do not describe this projector as ANSI-rated, ISO 21118-rated, native 4K, HDR10-capable, wirelessly enabled, edge-blendable, DICOM-certified or fitted with a motorised lens. We do not publish a fixed distance table in metres, because throw ratio converts differently for every screen's active area. We do not quote 30,000 hours as a normal-mode life, and we do not place 28 dB beside 6,500 lumens.
Every one of those is either unsupported by the product file, contradicted by it, or a basis conversion that would not survive scrutiny.
Specification Summary
| Model | EL-VPL605UH |
| Display technology | 3LCD, liquid crystal |
| Display panel | 3 * 0.64" with MLA |
| Brightness | 6,500 lm (TYP) |
| Native resolution | WUXGA 1920 * 1200 |
| Aspect ratio | Native 16:10; compatible 4:3 / 16:9 |
| Contrast (FOFO) | 5,000,000 : 1 |
| Colour gamut | 105% Rec.709 |
| Uniformity (actual min) | 0.8 (JIS X 6911) |
| Light source | Laser |
| Light life | 20,000 h Normal / 30,000 h ECO1 / 30,000 h ECO2 |
| Filter life | 8,000 h |
| Lens | ZMAX, F1.58–2.02, f 15.3–24.6 mm, manual zoom & focus |
| Throw ratio | 1.08 – 1.76 : 1 |
| Zoom ratio | 1.6* |
| Screen size | 30 – 300 inch |
| Offset | 50% – 95% |
| Lens shift | V +45% – 0%, H ±21% |
| Keystone | V ±30°, H ±30°; pincushion/barrel, 6-corner, 4-corner, grid tune |
| 360° projection | Yes |
| Edge blending | Not available |
| HDMI | 1.4B *2 in |
| VGA | *1 in, *1 out |
| USB | USB-A *1; USB-B *1 (display), USB-B *1 (upgrade) |
| Network | RJ45 *1 (display), RJ45 *1 (control); HDBaseT *1 optional |
| Control | RS232 *1; Crestron RoomView, AMX Discovery, PJ-Link |
| Audio | 3.5 mm in *1, 3.5 mm out *1, 16 W speaker *1 |
| Power consumption | 325 W Normal / 220 W ECO1 / 190 W ECO2; < 0.5 W standby |
| Noise | 38 dB Normal / 30 dB ECO1 / 28 dB ECO2 |
| Operating environment | 0–40 °C, 20–85% RH, 0–3,000 m |
| Dimensions | 405 * 358 * 137 mm (no lens); 405 * 363 * 137 mm (with lens) |
| Net / gross weight | ~7.8 kg / ~10.3 kg |
| Package | 510 * 498 * 260 mm |
| Certification | CCC, CB, NRTL, FCC, FDA, CE-EMC, CE-LVD, CE-ERP, energy grade 1 |
| EMC class | Class A @ 3 dBm |