company news about FLYIN Daily Recommendation Model 3：FLYIN Tiger Series 4K DLP Laser Projectors

Shenzhen, China — FLYIN proudly unveils the Tiger Series, a flagship lineup of 4K DLP laser projectors purpose-built for the most demanding professional environments — from engineering exhibitions and corporate AV to immersive entertainment, simulation training, and command-and-control centers. With three models spanning 7,000 to 10,000 ANSI lumens, the Tiger Series delivers graduated brightness to match any deployment scale while sharing an identical core platform of optics, I/O, and features for seamless system scaling.

At the core of the Tiger Series is a 0.65-inch DMD chip delivering native 3840 x 2160 resolution — 8.3 million distinct pixels with zero compromise. Unlike common 0.47-inch e-shift implementations, the larger DMD ensures superior light efficiency, thermal stability, and pixel-level precision. The DLP laser light source employs single-pass imaging with no spinning color wheel, producing purer colors and consistent brightness over time.

Key optical specifications include a 1,000,000:1 dynamic contrast ratio, 90% BT.709 color gamut coverage with less than or equal to 108% maximum color deviation, and HDR support for expanded brightness and contrast detail. Nine professional picture modes — Bright, Overglaze, Standard, Blending, Cinema, sRGB, Natural, Eye-caring, and DICOM SIM — enable one-tap optimization for any content type.

The Tiger Series features an ultra-long-life laser phosphor light source rated at 20,000 hours in Normal mode and 30,000 hours in ECO mode. At 8 hours of daily operation, that translates to 6 to 10 years of maintenance-free performance — a dramatic improvement over traditional lamp-based projectors requiring replacement every 3,000 to 5,000 hours. The sealed optical engine provides high dust protection suitable for malls, factories, and semi-outdoor environments, making the Tiger Series ideal for 24/7 installations, unattended exhibitions, and mission-critical control rooms.

Installation flexibility is where the Tiger Series truly distinguishes itself. 360-degree free-axis projection supports front, rear, ceiling, and floor mounting in any orientation. Motorized zoom and focus enable remote precision adjustment without physical access. The massive plus or minus 58% vertical and plus or minus 23% horizontal lens shift accommodates extreme off-axis installations without sacrificing image geometry through keystone correction. When geometry correction is needed, plus or minus 40 degrees horizontal and vertical keystone handles non-standard surfaces with ease. The 1.23-1.97 throw ratio supports image sizes from 60 to 500 inches, with an optimal range of 80 to 150 inches.

For large-scale deployments, the Tiger Series includes built-in edge blending for seamless multi-projector stitching and lens memory to store and recall multiple lens positions instantly — ideal for venues sharing a single projector across different configurations. Control options span RS-232, RJ45/Telnet/HTTP, AMX Discovery, PJ-Link, DMX512 for stage lighting integration, and USB-B for direct PC control. Direct Power On, Signal Power On, Auto Power Off, and Real-Time Clock (RTC) enable fully unattended 24/7 scheduled operation.

Native 4K at 60Hz support comes through dual HDMI 2.0 inputs plus one output, complemented by HDBaseT for single-cable transmission up to 100 meters over CAT6/7 — dramatically simplifying large-venue wiring. Horizontal sync range of 15-135kHz and vertical sync of 24-88Hz ensure full auto-detection. Game Mode and Low Latency Mode minimize delay for real-time applications including esports venues, simulation training, and interactive projection.

Noise levels reach just 32 dB for the EP-T756K and 35 dB for the EP-T856K/EP-T1006K in ECO mode — quiet enough for library and gallery environments. High Altitude Mode supports stable operation up to 3,650 meters. A 16W built-in speaker enables complete presentations without external audio.

The Tiger Series carries full global certifications — CCC, CE, FCC, CB, NRTL, and FDA — covering China, the EU, the US, and major international markets. Other premium details include a customizable startup screen/logo, OSD in 19 languages, Kensington lock slot, and wide voltage input (100V-240V, 50-60Hz) for global compatibility.

• Museums and Exhibitions: Immersive digital exhibits and multi-channel blended displays
• Corporate AV and Lecture Halls: Large-format presentations with side/rear projection
• Live Events and Night Attractions: 360-degree projection with ultra-low noise floor
• Esports and Gaming Venues: Game Mode + Low Latency for real-time visual fidelity
• Medical Education: DICOM SIM for radiographic and clinical imaging training
• Simulation and Training: High brightness + high contrast + low latency for flight-grade performance
• Cultural Tourism and Landscapes: High-altitude sheltered outdoor installations with sealed optics

FLYIN welcomes OEM/ODM partnerships for the Tiger Series, with full customization options for branding, packaging, firmware language packs, and accessory bundles. Competitive distributor pricing, marketing support materials, and after-sales training are available for qualified partners. To request a product demonstration, sample unit, or detailed quotation, contact the FLYIN sales team today.