logo

How is water screen projection created?

2026/11/13
Latest company blog about How is water screen projection created?

How is water screen projection formed? This section focuses on the projection principle and includes an analysis of FLYIN projection.

The reason water screen projection can create a clear image on water is not simply because there is water, but because the projection system precisely projects a high-brightness image onto the water film or mist, where countless water droplets then reflect and scatter the light. If you think of the water screen as a "flowing screen," then the projection system is the core power responsible for "sending the image up."

I. The Key to Water Screen Projection: It's Not the Water that Shines, but the Projection That Creates the Image

Many people believe that the water screen itself displays an image, but this is not the case. The water screen is merely the imaging carrier; the actual image comes from a high-brightness engineering projector.

The basic process of water screen projection can be understood as follows:

1. The water screen generation system first forms a stable water film. A high-pressure water pump pressurizes the water, which is then sprayed through a linear weir or slit nozzle, forming a continuous, uniform, thin, and flat water film.

2. The projection system projects the image onto the water screen. The engineering projector converts the video image into a high-intensity beam of light and projects it onto the water film over a distance.

How is water screen projection created?

3. Water Droplet Reflection and Scattering of Light The water film contains numerous tiny water droplets. When light strikes these droplets, it is reflected, refracted, and scattered. Some of this light enters the viewer's eyes, thus creating the image.

4. Continuous Water Flow, Continuous Image Playback The constantly flowing water acts as a constantly refreshed "screen," while the projector outputs continuous frames in sync, ultimately forming a dynamic image.

In short: The water screen provides the imaging surface, and the projector projects the image onto it. Without a projector, even the most beautiful water wall is just an ordinary fountain.

II. Why is the Projection System the Core of Water Screen Imaging?

The biggest difference between water screen projection and ordinary projection is that water is not an ideal screen; it transmits, reflects, and scatters light, and it also vibrates with the water flow. Therefore, the requirements for the projection system in a water screen are far higher than for indoor projection.

1. High Brightness is a Prerequisite

When using a water screen outdoors at night, ambient light, water surface reflection, and water mist all reduce brightness. Therefore, water screen projection typically requires:

  • High-brightness laser engineering projectors
  • Single or multiple projectors working in tandem
  • Large lake projects often use equipment with tens of thousands of lumens
  • Multi-projector blending to achieve ultra-wide screens

If the brightness is insufficient, the image will appear grayish, pale, or even just a blur of water.

How is water screen projection created?

2. Projection distance and lens configuration are crucial

Water screens are generally set up in lakes, rivers, or plaza pools. Projectors usually cannot be placed too close; they need to be placed on the opposite bank, on a boardwalk, or in a dedicated equipment room. Therefore, appropriate lenses must be selected based on the distance:

  • Long distance: Use a telephoto lens
  • Medium to close distance: Use a standard zoom lens
  • Large-screen projects: Use a high-magnification zoom lens
  • Multiple projectors stitched together: Perform edge blending and geometric correction

If the lens is unsuitable, problems such as the image being too large or too small, out of focus, or edge distortion will occur.

3. Projection Angle Determines Viewing Effect

A proper angle must be maintained between the projector and the water screen to prevent excessive light penetration or direct reflection onto unrelated areas.

Ideally:

  • The projection beam should be as perpendicular as possible to the direction of the water film.
  • The audience should be positioned on one side of the projection reflection path.
  • The image area should precisely match the height and width of the water screen.
  • Avoid strong reflections entering the audience area or causing halos.

If the angle is poor, even with a water screen, situations may occur where "the front is bright and the sides are dark" or "the image is half clear and half blurry."

How is water screen projection created?

3. Enhancing the Memorability of Nighttime Cultural Tourism Projects

FLYIN projection is particularly suitable for scenic spots, theme parks, lakeside night tours, and city square events. This is because it upgrades the water screen from a simple display medium into a giant visual entry point.

V. The Synergistic Principle of Water Screen Projection and FLYIN Projection

To summarize their relationship in one sentence:

> Water screen projection is an imaging system combining "water + projection," while FLYIN projection is a projection method that emphasizes long-distance, dynamic entry, and spatial narrative.

The complete synergistic process is roughly as follows:

  1. The water pump starts, forming a stable water film;
  2. The projection system preheats and completes position calibration;
  3. The playback server outputs video images;
  4. The projector projects a high-brightness image onto the water screen from a distance;
  5. The FLYIN camera in the image begins to move, such as light spots, beams of light, or flying objects approaching the water screen;
  6. The audience sees the image seemingly flying into the water from a distance;
  7. Music, lighting, fountains, and projections change synchronously, forming a complete performance.